repairandservice
How to identify if your equipment requires preventive or corrective maintenance service
Performs preventive
maintenance according
to equipment workload.
It is recommended to perform preventative maintenance on the Vaserlipo equipment every 3 months for high workload and every 6 months for low workload. This will help ensure optimal performance and prevent potential issues.
Maintenance plans vaser1.0/2.0
Take care of your equipment with annual maintenance plans.
Prevent Malfunctions
Performing regular maintenance allows you to check the current state of your equipment and prevent potential future failures.
Save on Costs
Maintenance plans for your Vaserlipo equipment can help you save costs on repairs and shipping to technical suppo.
Improve the safety of your equipment.
Performing periodic maintenance will extend the useful life of your equipment and will not generate constant failures.
Specialized technical assistance.
Personalized assistance will be provided, such as: care priorities and home visits.
In LASERTECH we have full experience to intervene all the accessories of your VASER equipment, such as:
- Ventex ( suction and infiltration)
- Handpieces
- Transducers
- Regular and Wireless foot pedal
Handpiece care
Each time the handpiece is sent to sterilization, an internal movement is generated which starts to twist the cable until it detaches internally. Therefore, it is advisable to perform preventive maintenance every 2 months.
Not only the handpiece needs maintenance, but also the transducers, as they start to wear out with constant use.
Whenever the cannula is to be screwed in, it must be done with the factory tool that comes with the handpiece from the, not doing so will damage it or generating too much pressure on it will damage it as well.
Handpiece care
Each time the handpiece is sent to sterilization, an internal movement is generated which starts to twist the cable until it detaches internally. Therefore, it is advisable to perform preventive maintenance every 2 months.
Not only the handpiece needs maintenance, but also the transducers, as they start to wear out with constant use.
Whenever the cannula is to be screwed in, it must be done with the factory tool that comes with the handpiece from the, not doing so will damage it or generating too much pressure on it will damage it as well.
KEY POINTS FOR THE GOOD CARE OF YOUR VASER EQUIPMENT.
MAINTENANCE
Remember that preventive maintenance should be performed according to the workload it has. If it is a high workload it should be done every 2 months and if it is low every 4 months.
TRANSDUCER/ CANNULA INSERTION
Whenever the transducer/cannula is to be screwed in, it should only be done with the factory tool that comes with the handpiece from the, doing otherwise will damage it or generate too much pressure on it.
POWER USADE
If the equipment is in constant use, it is recommended not to use the equipment for very long periods of time at power levels higher than 80%, doing so will extend the useful life of the equipment even more.
Frequently Asked Questions About Vaserlipo 1.0 and 2.0 Equipment Repair
If the equipment does not turn on after verifying that it is properly plugged in and there are no problems with the power supply, power switch, or motherboard, then it may be necessary to send the equipment for repair so that a trained technician can diagnose and repair the problem.
If you have verified that there are no problems with the power source, cooling circuit, or laser itself, then it may be necessary to send the equipment for repair so that a trained technician can diagnose and repair the problem.
If the fans and cooling circuit are working properly but you still have overheating issues, then there may be a blockage in the water cooling system. In this case, it may be necessary to send the equipment for repair so that a trained technician can resolve the problem.
If after checking the display cable, graphics card, and motherboard it still does not display information on the screen, then it may be necessary to replace the screen itself. In this case, it is necessary to send the equipment for repair so that a trained technician can replace the defective screen.
If the fans and cooling circuit are functioning properly but you are still experiencing overheating issues, you may need to send the equipment in for repair so a trained technician can resolve the issue.
If, after checking the display cable, graphics card, and motherboard, the screen still does not display information, it may need to be replaced. In this case, you will need to send the equipment in for repair so a trained technician can replace the faulty screen.
USA 3389 Sheridan Street 